OMNIAIRE OA18000B HEPA Negative Air Machine (Airflow18,000 cfm)

OmniAire 18000

The OmniAire 18000 is our largest portable HEPA air system with 18,000 CFM air flow capacity. The OA18000 is a modular air filtration machine with unique versatility. Setup and number of optional filters can vary depending on your specific project protocals.

OmniAire 18000 HEPA can be used to purify and re-circulate air or create positive or negative air pressure containment areas. It is used for mold, asbestos & lead abatement projects, construction sites, restoration projects, water or fire damage clean-up and many other applications. The OA18000 Air Filtration System ships standard with a single blower unit, three HEPA cabinets, and nine 99.97% efficient HEPA filters.

Blower Unit Features

The OmniAire 18000 modular system consists of Blower cabinet and three Filter cabinets, all connected by flex hoses. The cabinets are easy to transport and setup at any type of projects, including high-rise buildings and HAZMAT removal jobs.

The Blower cabinet contains twin 22″ vaneaxial blowers with 7.5 HP motors and controls, and operates on a 230 VAC/60HZ/45 AMP power source. A portable blower cabinet is mounted on 4″ casters, weighing 900 lbs. and is 30″ wide, 72″ high, and 48″ long. A reinforced steel internal frame enables the blower unit to be moved by forklift and by crane.

HEPA Cabinet Features

Each filter cabinet contains 3 filters. The individual filter cabinets each have a differential pressure gauge to measure loading of the filters with particulates. The 18000’s filter cabinets are mounted on casters, weigh 200 lbs. when fully loaded with HEPA filters, and are 26″ wide, 80″ high, and 28″ long. Three flex hoses connect the modular filter cabinets to the blower cabinet. Our standard hoses are 18″ diameter, 25’ long, with a 10″ WC vacuum rating. The OA18000 will accept many pre- and final filters depending on the application, such as HEPA, Carbon, and Bag filters to allow flexibility from project to project. OdorGuard carbon web filters or large capacity VaporTrap carbon filters are available to control odor and VOC’s. Individual filter cabinets can be located in three separate remediation areas while the blower unit remains outside of the containment area, to avoid unnecessary contamination of the blower module.

The OmniAire 18000 Filter Cabinets house nine filters are designed for:

• HEPA filters for abatement of hazardous waste with efficiencies up to 99.97% at .3 micron.
• For control of gaseous contaminants, odors and VOC’s, carbon filters are recommended when control of gaseous contaminants, that require a large amount of activated carbon, VaporTrap filters are available. These filters are a disposable V-bank filter containing 36 lbs. of bulk granular carbon. VaporTrap carbon filters can be installed in OmniAire 18000 filter cabinets in the place of HEPA.
• Our standard Dustlok filter, Primary/secondary filters are combined in dual density poly pad filter with MERV-8 efficiency. The filter is treated with anti-microbial additive and tactifier to increase dust holding capacity extending the life of your final filter. Dustlok filters are an economical filter for all types of applications.
• To control non-hazardous dust, the OmniAire 18000 can be equipped with Bag Filter Housing Modules, and MERV-14 bag filters. Our bag Filters are constructed of synthetic, moisture resistant media and galvanized steel separators. The Bag Filter Housing Module can be installed in place of HEPA filter for efficient and economical bulk dust collection.

*Airflows are based on blower manufacturer curves. Different HEPA filters may cause the flow to vary.