• QUESTIONS? GIVE US A CALL! 1 (877) 293-0784

Navigate to the Spycor Environmental homepage

You are here:Home > Air Filtration
Predator 1200 Portable Air Scrubber (variable airflow, 300 cfm-1,000 cfm) Abatement Technologies, The Predator 1200 PAS delivers heavyweight performance in a lightweight, virtually indestructible rotational molded cabinet. With a lifetime cabinet warrant

Predator 1200 Portable Air Scrubber with UV Light (variable airflow, 300 cfm-1,000 cfm)

Abatement Technologies
0 Reviews
Product Code: PRED1200UV
In Stock! Limited Quantities Available.
True HEPA Filtration with UVGI Germicidal LampThe PRED1200UV combines the bacteria-killing power of germicidal UV technology with the air-cleaning performance of HEPA filtration.

Features and Benefits:
  • Variable speed airflow, with maximum rated airflow as high as 900cfm
  • Roto-molded body components are made from UL94HB flame retardant resin with EPA-registered microbial growth and UV inhibitors
  • Upright design includes a built-in transport dolly, non-marking rear wheels and front 360° swivel casters
  • Can operate in tight spaces where horizontal operation is needed
  • Power consumption of less than 3.5 amps @ 120VAC allows for daisy chaining multiple units per 15A circuit
  • The PRED1200UV has been independently tested and certified in accordance with applicable UL and CSA safety requirements
  • Airflow* - 300-900 cfm
  • Air Changes Per Hour - 6 ACH @ 6,000-8,000 ft³
  • Net Weight with Filters - 70 pounds
  • Shipping Weight - 95 pounds
  • Dimensions (L x W x H) - 22”L x 24”W x 42”H
  • UVGI Lamp - 39 watts total output
  • Power Supply Requirements - 120 volts AC, 60Hz, 15 amps
  • Normal Operating Amps - 3.5 amps or less (Daisy-chain multiple units on one 15 amp circuit)
  • Motorized Impeller - Motorized impeller rated for 100,000 hours with thermal overload protection, auto reset, 60Hz, single-phase
  • Circuit Breaker - 12 amps
  • Safety First - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
  • Cabinet Material - UL94HB flame retardant resin with EPA-Registered microbial inhibitor
  • Built-in Dolly - Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for gripping
  • Pre-Filter Access - Hinged door secured by rotating latches. Full perimeter gasket seals to protect against bypass of dirty air
  • Filters:
    • Stage 1 pre-filter - 1” coarse particulate pre-filter (MERV 4)
    • Stage 2 pre-filter - UV-resistant 2” pleated particulate pre-filter (MERV 8)
    • Stage 3 pre-filter - An internally mounted, 39-watt UVGI lamp located below the pre-filters in a single module
    • Final stage HEPA filter - Long-life true HEPA tested and certified to an efficiency of 99.97% or higher for 0.3 micron particles; does not rely on an electrostatic charge to maintain 99.97% HEPA efficiency


Average Customer Review:
( 0 )