PEROx Air Purifier Applications:
PEROx air purifiers are a powerful tool at fire and flood restoration projects, mold abatement sites, and for control of VOCs, odor and bio-contaminants. Highly portable PEROx PG units are designed to be connected by flex duct to the exhaust from OmniAire Negative Air Machines or to the intake side of any air mover. PEROX 1000 units contain an integrated 1000 CFM blower and can be set up and running in seconds. The PEROx purification process utilizes Ionized hydroperoxides oxidizer plasma, which rapidly sanitizes the air passing through and continues to seek bio-contaminants in surrounding air and on hard surfaces. Our portable units can safely operate in occupied areas and control odors during the restoration process and during the final cleanup.
PEROx air purifiers provide a multitude of benefits in a wide range of industries. PEROx PG machines are designed to be used effectively at abatement and remediation sites for odor, VOC, and mold control as well as sterilization after final clean-up. Our air purifiers may also be found in bio-contamination sites such as crime scenes, medical facilities, and lab environments to control virus and other dangerous biohazards.
Hydroperoxide Generation Technology:
The oxidizer plasma created in the PEROx air purifiers cell is made from oxygen and humidity in the air using a process called photo hydro ionization. Our process creates positively charged particles which both repel each other forcing distribution, and attract to surfaces making sanitizing hard to reach spaces more efficient. The ionized hydrogen peroxide disperses like a gas and attaches to all surfaces in the containment area destroying bio-contaminants immediately. Since these positively charged droplets are attracted to all surfaces PEROx technology is ideal for attacking odors at the source. Because ionized hydroperoxides are not affected by temperature or humidity, PEROx air purifiers can be used in a wide range of applications and environments.
When the job is complete, unused oxides convert back to H20 and O2 within 15 minutes with no chemical residue or additional decontamination. This makes the PEROx one of the most environmentally friendly air purifier methods on the market. Our purification process constantly occurs in nature and has been used in thousands of HVAC installations with no known health risks. Independent safety tests performed on hydroperoxide gas molecules have shown concentrations of 0.01 ppm are an effective infection control and microbial threat agent. Government safety guidelines on hydroperoxide gas state that 1 ppm is the maximum allowable limit of concentration, therefore 0.02 ppm is 1/50th or well below the government safety limit. Testing of hydroperoxide generators in PEROx units showed:
- Hydro-Peroxides outdoor level 0.01
- Hydro-Peroxides inside unit off 0.00
- Hydro-Peroxides inside unit on 0.01
Ozone levels have also been tested over 6 consecutive days, including sunny and rainy days. Levels of Ozone ranged from 0.01 to 0.02 ppm. Levels inside the tested area were comparable to outside levels. Levels of 0.02 are considered very low.
Ionized hydro peroxide purifiers rapidly destroy bacteria, virus, VOCs and odors
Independent studies by labs and universities confirmed following results:
- 99.99% reduction in surface bacteria/virus
- Over 80% VOC reduction
- 97% airborne bacterial reduction
- 99% reductions of E-Coli, Listeria, Strep and Bird Flu
- 85% odor reduction
- 97% airborne mold reduction
- US Military approved for mold protection in field hospitals
- Hospital approvals Infectious Diseases U.S. and International 99% reduction of Staph (MRSA)
- 99% food surface microbial reduction
- Tested and approved by the Chinese Government for protection against the SARS virus
- Approved by the USDA,FSIS and FDA for use in food processing
For Mold Spore Test result data, click here.