Performance:
Quiet and smooth operation with motorized impeller and variable speed control; multiple units can be operated stacked three high and four to five units can be daisy-chained on one 15 amp circuit. Air flow with HEPA and primary/secondary filters installed is from 200 to 600 cfm, controlled by the variable speed controller. Free airflow without filters is 1000 cfm and blower is capable of 3.35 WC static pressure which extends the useful life of your filters.
Filtration-:
Our standard final filter is HEPA 99.99% tested and certified. The primary/secondary filter is dual density, MERV 8 with antimicrobial treatment - efficient and economical.
Optional filters for NITRO 600 could be combine with or replace our standard filters:
OdorGuard 600 carbon filters for odors and vapors can be an addition to any particulate filter.
Pleated MERV 11 high efficiency secondary filter installed in the door cavity.
Housing:
High density polyethylene plastic housing has sunrise orange/yellow color for visibility and is design for high strength and smooth air flow. Polyethylene has UL 98HD flammability rating with UV inhibitor for outdoor use. Polyethylene surface does not support bacterial growth and is easy to clean. Units stack safely three high with interlocking design and have soft rubber handle for a comfortable grip. Interlocking hinged door has a 3.5 deep compartment for variety of pre-filters to meet your job needs. Machine has integral 10 diameter ring connections for flex hoses. While the NITRO weighs only 36 lbs, its walls are solid, the HEPA seal is consistent and our larger motorized impeller delivers higher flow.
OmniAire 600N
Airflow Ratings (cfm) ...................................200 to 600
Operating Speed
.Variable
Motorized Impeller w/Thermal Overload .......rated 1000 cfm
Power Requirements (Volts/Hz) * ...................115V/60Hz
Motor operating amps ................................... 2.2 amp
GFI protected convenience outlets..................8.0 amp
Circuit breaker
...........12.0 amp
Filtration Stages ............................................. 3 to 4
HEPA Filter 99.97%@0.3 micron ..................Tested/Certified
Net Weight With Filters ................................. 36 lbs.
Dimensions (LxWxH)......................................25x18.5x18.5
Cabinetry
.................................Flame retardant polyethylene
Exhaust and Inlet Collars Diameter .................10
Carrying Handle Soft Rubber Grip....................1
Operational sound level (at 5 ft)...................... 62 to 68 dBA
*230 Vac/50-60Hz machine is available
Airflows based on blower manufacturer curves. Different
HEPA filters may cause the flow to vary.
ORDERING INFO............PART #
Aire 600N ............................. OA600N
HEPA Filter 99.97%, 0.3μ .............. OAH15156
Geo95 MERV 14 filter ..................... OAG15154
Primary/Secondary Filter (qty 20). OAP1616
Quick Clamp, 10 dia. ..................... QCW12
Flexible Duct, 10 x 25 .................. OAD10
OdorGuard 600 Carbon Filter........ OG1616
