• QUESTIONS? GIVE US A CALL! 1 (877) 293-0784

Navigate to the Spycor Environmental homepage

You are here:Home
3' Panel Assembly for Edge-Guard

3' Panel Assembly

Edge-Guard
0 Reviews
$0.00
Product Code: EG4001
Usually Ships in 1 to 2 Weeks
Edge-Guard's 36" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel, shown above, slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up the the ceiling, then retighten the knobs.

The 36" panels, like the 12" panels, are typically used for odd shaped configurations. It's nice to have a couple on hand but the 48" panels should be used when possible. Setup time for this panel is about 2 minutes.

Edge-Guard's 36" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to it's bottom side to create a seal to the floor.The sides of the panel contain closed cell gasket material to form a seal between the panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.

Grid clips and camlocks are included.

Reviews

Average Customer Review:
( 0 )