ZipWall ZP2 - ECONOMY Case of 6 (12 Poles)

NEW! ZipWall® ZP2 - ECONOMY

Each ZP2 package contains 2 Zip^TMPoles a head, plate, tether, and GripDisk for each pole.

Pack of 2 / 6 Packs per case (Total of 12 Poles)

The Zip^TMPole is our new low-cost spring-loaded pole designed for commercial and residential contractors, as well as the DIY enthusiast. About half the cost of our aluminum poles, the Zip^TMPole is strong, lightweight and compact. Its 10’ height is tall enough for many jobs, yet when collapsed, the Zip^TMPole will easily fit in the trunk of a car. Like our Contractor Grade aluminum spring-loaded poles, the Zip^TMPole eliminates the need for tape, ladders or staples, so it will not damage finished surfaces.

Consider the labor savings of a ZipWall® dust barrier system: A 30 foot long 9 foot high barrier takes about 1 hour to erect using conventional methods. With the Zip^TMPole system, the same barrier can be completed by one person in under 5 minutes.

The Zip^TMPole offers all the advantages of our Contractor Grade products. The twist-locking telescoping pole lets you raise the sheeting to the ceiling without a ladder. The exclusive spring-loaded mechanism at the top lets you lift the pole to tuck the sheeting under the foot while keeping the barrier under tension at all times.

Zip^TMPoles are made of rugged steel tubing. They have a baked-on finish and weigh just 1.5lbs each. Ideal for many uses, they can accept plastic or cloth sheeting up to 8 mils thick and can support up to 80 lbs each. Zip^TMPole height ranges from 4’ 2” to 10’ 3”. Poles should be placed every 8' to 10' or closer if there is a lot of air movement. Use a GripDisk^TM under each pole to secure it on smooth flooring like vinyl or wood.

Zip^TMPoles work with all of our Tight-Seal™ accessories. Push the plastic sheeting tightly against the ceiling by adding Foam Rails^TM. You can also seal tightly along the walls by adding our Side Pack^TM.

.