Envirco Hospi-Gard® IsoClean® 400 Freestanding 120V 99.99% Efficiency

ENVIRCO IsoClean 400 PortableHEPA Air Cleaning System
Engineered to provide the optimum combination of efficient HEPA air cleaning and provide a large number of room air changes per hour to minimize the spread of airborne diseases. The IsoClean 400 comes equipped with a hospital grade HEPA filter that has an efficiency of 99.99%. The unit can be set up in three modes: 100% recirculation, 100% exhaust (negative pressure) and partial exhaust. Both the prefilter and HEPA filter are easily accessible for quickand easy replacement. Easy to use and move, the IsoClean 400 fits easily in areas with limited floor space.

How it Works
The Isoclean is designed to draw unfiltered air into the lower portion of the unit towards the prefilter.

The prefilter goes to work and begins the process of filtering out contamination such as dust, dirt and dander. Air then heads to the HEPA filter. ASHRAE is currently recommending a MERV 13 rating to combat airborne pathogens. HEPA filtration provides and even greater line of defense than a MERV 13 filter.

Finally, the air is cleansed. When configured for 100% air recirculation, the HEPA filtered air is returned to the environment.

Durable Components
The IsoClean 400 is manufactured in theUSA and contains durable and long lastingcomponents. The cabinet is made of weldedsteel which is designed to withstand everydayusage and the HEPA filter is long lasting whichcuts down on replacement costs.

Low-High Clean AirCirculation Pattern
Purified air is discharged at a high velocity from the exhaust grille located at the top of the IsoClean 400 to generate a sweeping, low-to-high air circulation pattern with adequate reach to optimize the clean breathing zone.

Features

• Up to 400 CFM of HEPA filtered air
• Three configurations: 100% recirculation 100% exhaust and partial exhaust
• Negative pressure capable
• Variable speed adjustment
• Greater than 6 air turnovers typical in a 500 sq. ft. space
• Quiet operation and simple maintenance
• 99.99% efficient at 0.3 micron aluminum frame HEPA filter standard
• Low-High clean air circulation pattern

Applications

• Classrooms
• Medical / Dental Offices
• Waiting Rooms
• Gym / Spin Rooms / Yoga Studios
• Cafes/Delis

Construction
Welded steel filter plenum and blower housing with a corrosion resistant polyurethane enamel finish. Four 2” (51 mm) casters, two locking.

FilterAluminum
Framed HEPA type, with a minimum efficiency of 99.99% @ 0.3 micron, aerosol challenged. Airflow sensor indicates when the filter needs changing.

Prefilter
Disposable non-woven polyester media with frame -30% ASHRAE.

Motor/Blower Assembly
Direct drive, continuous duty, 1/3 Hp, 0.25 kW, 3-speed motor with sealed-for-life bearings and inherent overload protection located on the “clean side” of the filter. Motor/blower assembly is mounted on vibration dampening rubber mounts and designed to provide rated airflow through a 50% increase in initial static pressure.

Electrical
Standard 5-15P, 115 V, single phase,rubber-covered cord with3-prong hospital grade, grounded plug (120V Model). Standard6-15P, 220 V, single phase, rubber-covered cord with 3-pronghospital grade, grounded plug (220V Model).