Edge-Guard's 24" panels are 7'-8" tall and extend to 10'-0". The adjustable upper panel slides up to the height of the ceiling. To adjust the height you simply loosen the knurled knob on each side, slide the panel up the the ceiling, thenretighten the knobs. We offer several options on our 24" panels.
Edge-Guard's 24" panels include a self leveling channel on the bottom to compensate for unlevel floors. This channel has a neoprene gasket adhered to it's bottom side to create a seal to the floor. The sides of the panel contain closed cell gasket material to form a seal between the panels and the top of the panel has a 1/4" thick soft ether foam gasket to conform to the ceiling.
Grid clips and camlocks are included with the panels.
4002.1 is our standard panel with a port to exhaust HEPA filtered air out of the containment area. This port has an 8" I.D. and a 10" O.D. on both the inside and outside of the panel.An 8" diameter plug is tethered to the inside of the panel to close the port off when not in use.
