| Performance:
Quiet and smooth operation with motorized impeller and variable speed control; multiple units can be operated stacked three high and four to five units can be daisy-chained on one 15 amp circuit. Air flow with HEPA and primary/secondary filters installed is from 200 to 600 cfm, controlled by the variable speed controller. Free airflow without filters is 1000 cfm and blower is capable of 3.35” WC static pressure which extends the useful life of your filters.
Filtration- Choose between:
1. Our standard final filter is HEPA 99.97% @ 0.3 micron efficiency, tested and certified. The primary/secondary filter is dual density, MERV 8 with antimicrobial treatment - efficient and economical.
2. Our economical Geo95 MERV 14 filter with solid plastic frame can replace HEPA filter for non-hazardous dust contaminants. It has an unique design for high dust holding capacity and low air flow resistance.
Optional filters for NITRO 600 could be combine with or replace our standard filters:
• • OdorGuard 600 carbon filters for odors and vapors can be an addition to any particulate filter.
• Pleated MERV 11 high efficiency secondary filter installed in the door cavity.
Housing:
High density polyethylene plastic housing has sunrise orange/yellow color for visibility and is design for high strength and smooth air flow. Polyethylene has UL 98HD flammability rating with UV inhibitor for outdoor use. Polyethylene surface does not support bacterial growth and is easy to clean. Units stack safely three high with interlocking design and have soft rubber handle for a comfortable grip. Interlocking hinged door has a 3.5” deep compartment for variety of pre-filters to meet your job needs. Machine has integral 10” diameter ring connections for flex hoses. While the NITRO weighs only 36 lbs, its’ walls are solid, the HEPA seal is consistent and our larger motorized impeller delivers higher flow.
|
