| The highly vapor permeable, reflective, watertight roof underlay with energy saving properties. Cool in the summer, warm in the winter.
Material
High strength Polyester fabric with vapor permeable Polyurethane coating and Titanium finish for reflection of radiant heat.
Characteristics
Reflects up to 50% of radiant energy - the temperature in the attic can be lowered by up to 2 degrees compared to roofs with conventional roof underlays.
The smooth surface of the Polyester fabric, as well as the embossed Polyurethane surface make installation fast and simple. High tear strength has proven to enhance safety and reliability of roofs for more than 15 years.
Application
DELTAŽ-MAXX TITAN is lightweight, making the installation simple and safe. It unrolls quickly and can easily be aligned. This tough material will resist any damage from normal handling on construction sites (such as being pulled or walked on), and has proven outstanding performance when exposed to wind.
Evaluation Report and Building Code Approval
Technical Data
|
Water Vapor Transmission
ASTM E96-00, Proc. B |
196.3 g / sqm / 24 h |
|
Permeance - ASTM E96-00, Proc. B |
1620 ng / Pa / s / sqm |
|
Perms - ASTM E96-00, Proc. B |
28.3 grains /h /sqft /in Hg |
| Breaking Load - ASTM D5035 |
MD: 100.6 lb / 2in (447.5 N / 50mm)
CD: 60.2 lb / 2in (267.7 N / 50mm) |
| Elongation at Break - ASTM D5035 |
MD: 55.1%
CD: 93.6% |
| Tear Resistance - ASTM D1922-03a |
MD: 5640 g
CD: 7604 g |
| Tearing Strength - ASTM D4533 |
MD: 58.3 lb (259.3 N)
CD: 42.1 lb (187.3 N) |
|
Water Impact Penetration Resistance
AATCC 42-2000 |
no water passing |
|
Hydrostatic Water Resistance
CAN/CGSB-4.2 No 26.3-95/ISO |
776 cm |
|
Fastener Pull-Through Force
ASTM D3462 |
232 N |
|
Flame Spread - ASTM E84-09 |
0
NFPA Class A; UBC Class I |
|
Smoke developed - ASTM E84-09 |
40
NFPA Class A; UBC Class I |
|
Roll weight |
approx. 29 lb (13 kg) |
|
Roll width |
4.92 ft (1.5 m) |
|
Roll length |
164 ft (50 m) |
|
Temperature range |
-40 °F to +176 °F
(-40 °C to +80 °C) |
|
